Pitney Bowes RISO ComColor Printer - Manual (Page 118)

2-40
2 Copy
ComColor Series User’s Guide 03
Add cover
Add preprinted sheets or colored paper that has
been loaded in the tray, to the front and back of the
printouts as covers.
■ Binding side
Select the binding side of the paper.
[Left], [Right], [Upper]
■ Front cover
[No]
[Yes]
A cover is added to the front of the printouts.
Select the feed tray to use.
■ Back cover
[No]
[Yes]
A cover is added to the back of the printouts.
Select the feed tray to use.
You cannot use paper of a different size from that
of the paper to be copied.
1 Press [Functions] on the copy
mode screen.
2 Press [Add cover].
The [Add cover] screen is displayed.
3 Select the binding side.
4 Configure the cover settings.
Select [Yes] or [No] for [Front cover] and [Back
cover].
5 Press the select tray button.
Press [Yes] to display the [Select tray] screen.
Select the feed tray that is loaded with cover
paper, and press [OK].
The cover paper settings are confirmed and the
[Add cover] screen is displayed.
6 Press [OK].
The settings are confirmed and the previous
screen is displayed.
7 Load the cover paper.
Load cover paper in the tray selected in Step 5.
● The side in which the paper is loaded varies
depending on the tray.
Standard tray: Load the paper with the first
page facing up.
Feed tray: Load the paper with the first page
facing down.
See "Loading Paper" (p. 27) in "Print
Preparations".
● Change the paper type and feed control
settings to match the paper to be loaded.
(p. 2-10 "Feed tray")