Pitney Bowes RISO ComColor Printer - Manual (Page 38)

36
ComColor Series User’s Guide 03
3 Pull out the carriage along with the
stacking tray on it.
Hold the handle, and pull out the carriage slowly.
Printouts may fall if you move the carriage too
quickly.
4 Remove printouts from the
carriage.
5 Return the carriage to the high
capacity stacker.
Make sure in advance that the stacking tray has
been attached to the carriage.
6 Close the right cover of the high
capacity stacker.
● If you remove only printouts
1 Open the right cover of the high
capacity stacker.
● You can specify the downward position of the
stacking tray in [High capacity stacker] of the
"Admin. Settings". To change the downward
position, contact the administrator.
● At some downward positions of the stacking
tray specified in [High capacity stacker] of the
"Admin. Settings", removal may be difficult
because printouts touches the paper guides. In
that case, close the right cover, press the
stacking tray descent button to lower the
stacking tray, and remove printouts.
2 Remove printouts.
For some sizes of output sheets, removal may be
difficult because printouts are touching the handle
of the carriage. In that case, close the right cover,
and press the stacking tray descent button to
lower the stacking tray to the carriage. You can
pull out the carriage and remove sheets.