Before you begin, Inspect the board, Before you begin –7 inspect the board –7 – Altera Embedded Systems Development Kit, Cyclone III Edition User Manual
Page 13
1–7
Development Board Version 1.0.
Altera Corporation
Altera Embedded Systems Development Kit, Cyclone III Edition
July 2010
Before You Begin
Before You
Begin
Before proceeding, check the contents of the Altera Embedded Systems
Development Kit, Cyclone III Edition:
■
Development Hardware boards including:
●
Cyclone III development base board
●
LCD Multimedia HSMC
●
HSMC to Santa Cruz/USB/Mictor (H2SUM)
■
SD-Card Reader
■
SD-Card Flash
■
USB Cable
■
Accessory Daughter Cards
●
Debug HSMC Loopback board
●
One 16 character X 2 line Liquid Crystal Display (LCD)
■
16 V DC power supply with the appropriate cable for your region
Inspect the
board
Place the board on an anti-static surface and inspect it to ensure that it is
not damaged during shipment. Verify that all the components are on the
board and appear intact.
1
In typical applications with the development board, a heat sink
is not necessary. However under extreme conditions the board
may require additional cooling to stay in operating temperature
guidelines.