TOYOTA 2011 Sienna User Manual
Page 274
Advertising
223
2-1. Driving procedures
2
Wh
en drivin
g
Changing shift ranges in S mode
When the shift lever is in the S position, the shift lever can be oper-
ated as follows:
Upshifting
Downshifting
The initial shift range in S mode is set automatically to “5” or “4”
according to vehicle speed. However, the initial shift range may be
set to “3” if the AI-SHIFT has operated while the shift lever was in the
“D” position. (
■
Shift ranges and their functions
● You can choose from 6 levels of engine braking force.
● A lower shift range will provide greater engine braking force than
a higher shift range, and the engine speed will also increase.
Advertising
This manual is related to the following products: