TOYOTA 2011 Sienna - Manual (Page 636)

570
3-8. Other interior features
Test the operation of the HomeLink ® by pressing the newly
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
® buttons.
■ Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■ Reprogramming a button
The individual HomeLink
® buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink ®
Press the appropriate HomeLink ® button. The HomeLink ® indicator
light on the HomeLink ® transceiver should turn on.
The HomeLink ® continues to send a signal for up to 20 seconds as long
as the button is pressed.
Reprogramming a HomeLink ® button
Press and hold the desired HomeLink ® button. After 20 seconds, the
HomeLink ® indicator light will start flashing slowly. Keep pressing the
HomeLink ® button and press and hold the transmitter button until the
HomeLink ® indicator light changes from a slow to a rapid flash.
Release the buttons.
STEP 5
STEP 6