TOYOTA 2011 Sienna User Manual
Page 695
Advertising
637
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
■
Inspection and adjustment procedure
Tire valve
Tire pressure gauge
Remove the tire valve cap.
Press the tip of the tire pressure gauge onto the tire valve.
Read the pressure using the gauge gradations.
If the tire inflation pressure is not at the recommended lev-
els, adjust the pressure.
If you add too much air, press the center of the valve to
deflate.
After completing the tire inflation pressure measurement
and adjustment, apply soapy water to the valve and check
for leakage.
Put the tire valve cap back on.
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
Advertising
This manual is related to the following products: