BIXOLON SRP-150 - Manual (Page 20)

Rev. 1.08 - 20 -
SRP-150
5. Sample Test
1. Sample Printing Test
* Sample Test Start-up
After loading paper and close the cover and the PAPER FEED button pressed and held,
the sample test will start upon power on. The self-test will conduct printing according to the
existing setting of the following information available.
- Software version control
- DIP switch state
* Preparation State
The printer will print the message
“Please press the FEED BUTTON” after printing the
existing setting state. LED flickering indicates the printer is in the preparation state for
printing test.
2. Self-test Completion
Upon the printing test completion, the printer will print " ** TEST COMPLETED **
”,
indicating the test is finished.
It is necessary to restart printing if the self-test is not over yet.