BIXOLON SRP-150 - Manual (Page 37)

Rev. 1.08 - 37 -
SRP-150
GS H n
[Name] To select the printing position of the HRI characters
[Type] ASCII
ESC H n
HEX 1D 48 n
DECIMAL 29 72 n
[Range]
0 ≤ n ≤ 3 , 48 ≤ n ≤51
[Description] To select the printing position of HRI characters when printing the bar code
Select the printing position using n as shown below
n Printing position n Printing position
0,48 No printing 2,50 Under the bar code
1,49 Over the bard code
3,51 Both over and under
the bar code
- HRI (Human Readable interpretation)
[Default value] n = 0
GS I n
[Name] To send the printer ID
[Type] ASCII
ESC I n
HEX 1D 49 n
DECIMAL 29 73 n
[Range]
1 ≤ n ≤ 3 , 49 ≤ n ≤ 51
[Description] To send the printer ID using n as shown below
n Printer ID Specifications ID (HEXaDECIMAL)
1,49 Printer Model ID
SRP-150P / SRP150U /
SRP-150S
30
2,50 Type ID 02
3,51 ROM Version ID Depends on ROM version 10
GS L nL nH
[Name] To set the left margin
[Type] ASCII
GS L nL nH
HEX 1D 4C nL nH
DECIMAL 29 76 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Left margin is determined by nL and nH.
Left margin is set to [(nL + nH X 256) X (horizontal motion unit6)] inches
Printable area
Left Margin Printing area width