CIRCUTOR CIRWATT-B410T Series - Manual (Page 25)

THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL 25 / 53
Tariff output (depending on version)
Type Relay
Operational Selection of the activation rate
Electrical characteristics
Max. 250V AC 5A with connection to the neutral potential when
activated
Impulse input (depending on version)
Type Insulated via optocoupler
Operational Reading of impulses with width >30ms. Maximum of 8 impulses/sec.
Electrical characteristics
Self-powered at +5V.
Maximum current: 8mA
Leakage current (depending on version)
Type Suitable for use with Circutor WN transformers
Operational
Measurement of leakage currents detected by the WN, with a
cadence of 1 second
Electrical characteristics Maximum current: 300mA + 20% overrange
Build features
Enclosure In compliance with DIN 43859
Dimensions In compliance with DIN 43857
Degree of protection IP 51
Optical port
Hardware EN 62056
Speed 9600
Protocol REE Protocol, based on IEC-870-5-102
PLC (depending on version)
Protocol REE Protocol, based on IEC-870-5-102
Modulation system DCSK with repeater system
Consumption 1.2W 12VA
Electric port (depending on version)
Hardware RS232 or RS485
Speed From 9600 to 38400 baud
Protocol REE Protocol, based on IEC-870-5-102
Ethernet (depending on version)
Hardware Ethernet
Speed From 9600 to 38400 baud
Protocol REE Protocol, based on IEC-870-5-102