CIRCUTOR CIRWATT-B410T Series - Manual (Page 32)

THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL 32 / 53
3.- METER OPERATION
In this section we describe the behaviour of the equipment from a functional point of view. In
other words, we will explain how to manage all of the information that it gives us, as well as
how to configure the different functions of the system.
3.1.- Navigation and viewing modes
To navigate through the different information screens, the read button will be used. Movement
within the same level will be done using short presses of the button. To access a higher level,
a long press will be used. The device will return to stand-by mode 60 seconds after the last
press of the button.
3.1.1.- Stand-by mode
The device is in this mode by default until one of the buttons is pressed.
The stand-by screens are designed to present information cyclically, without the need to carry
out any action upon the meter. This kind of navigation is exclusive to the stand-by mode.
The scrolling line will alternate the information once every 6 seconds. When the read button is
pressed once quickly (short press), the reading from the totalizer being displayed in that
moment will be frozen on the screen.
Using short presses, the user can navigate manually through all of the defined totalizers.
On devices configured for a simple active tariff, the stand-by screen will only show a static
view of the active totalizer.
3.1.2.- Read mode
This mode is activated by pressing and holding down the read button (long press). Navigation
within the same level will be cyclic.
This mode uses a tree structure of screens, organized into three hierarchical levels, through
which the information is accessed.
The diverse information that can be displayed in the Read mode will be browsed through using
the Read button, and short and/or long presses of this same button.