Disabl, Bill, Prog – CIRCUTOR CIRWATT-B410T Series User Manual
Page 45: Reset, Return
THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL
45 / 53
Stand by
bILL
LP
S
P
Wire conver sensor
activated
Wire conver sensor
deactivated
prog
S
P
S
P
Reset
biLL
S
P
prog
S
P
return
S
P
return
S
P
Closure menu
After carrying out a contract closure (C1, C2 or C3), the following screen will be displayed,
remaining on screen for 3 seconds:
bill
C1
If the manual closure feature is inactive on the device due to communications, the following
message will be displayed on screen for 3 seconds:
bill
Disabl
Special programming menu
This enables the modification of those parameters that require the seal of the sealable button
to be broken. Such is the case of the transformer ratios and the integration period of the load
curves.
Reset menu
This feature deletes any programmed parameters and all the stored data. The totalizers are
reset to zero. The date and time are kept, along with the battery status and the parameters set
by the manufacturer.