CIRCUTOR CIRWATT-B410T Series - Manual (Page 42)

THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL 42 / 53
Screen L47 (INFORMATION: OUTPUT CONSTANTS)
This screen displays information about the output impulse values. Since said data does not
correspond to any specific contract, but is instead data which is relevant to all of them, field B
takes the value 0.
Display OBIS Description
L47
OUtput
0.03.3 OUTPUT 1
0.03.4 OUTPUT 2
0.03.5 OUTPUT 3
0.03.6 OUTPUT 4
The options for each output type are:
Ax Y : x = 1:active imported / x = 2 : active exported / Y = impulse weight
Rx Y : x = quadrant no. (reactive quadrant x) / Y = impulse weight
Vh Y : Impulse output Vh (average of 3 phases) / Y = impulse weight
Pot : Maximeter
C x P y : x = contract no. / y = tariff period no. (the output indicates the tariff)
Screen L48 (INFORMATION: CLOCK CHANGES)
This screen displays information about daylight saving clock change dates. Since said data
does not correspond to any specific contract, but is instead data which is relevant to all of
them, field B takes the value 0.
Display OBIS Description
L48
HoUr L
0.00.8
WINTER-SUMMER CLOCK CHANGES: Indicates the date and time of the winter to
summer daylight saving clock change.
0.00.9
SUMMER-WINTER CLOCK CHANGES: Indicates the date and time of the summer to
winter daylight saving clock change.
Screen L5 (QUALITY)
This is the screen that gives access to the information related to quality aspects of the supply
voltage. It is a MENU screen.
L5
qUALI
It gives access to the other, dependent MENU screens, shown below:
Screens Description Comments
L50
oUt U
Time outside limits Time outside limits
L51
FSHor. U
Voltage ausence Voltage ausence