Power fail in one or more phases, Applicable standards – CIRCUTOR CIRWATT-B410T Series User Manual

Page 28

Advertising
background image

THREE PHASE STANDARD CIRWATT B METER

CIRWATT B THREE PHASE INSTRUCTION MANUAL

28 / 53

If the communications failure coincides with the quarter-of-an-hour period change, and its
duration is longer than 10 minutes, the measurement of the affected periods will be
invalidated, i.e. flag IV = 1.

1.32.4.- Power fail in one or more phases

The measurement for the period in which the failure has occurred is invalidated, IV = 1.

1.33.- Applicable standards

The Cirwatt Type B meter complies with the following standards:

IEC 62052-11:2004 - Electricity metering equipment (AC). General requirements, tests

and test conditions. Part 11: Measuring equipment.

IEC 62053-21:2003 - Electricity metering equipment (AC). Particular requirements. Part

21: Static meters for active energy (classes 1 and 2).

IEC 62053-23:2003 - Electricity metering equipment (AC). Particular requirements. Part

23: Static meters for reactive energy (classes 2 and 3).

IEC 62056-21:2003 - Electricity metering equipment. Data exchange for meter reading,

tariff and load control. Part 21: Direct local data exchange.

UNE 20324:1993 - Degrees of protection provided by enclosures (IP Code). (IEC

529:1989).

IEC 60068-2-11:2000 - Environmental testing. Part 2: Tests. Ka test: Salt mist. (IEC

60068-2-11 (1981-01)).

IEC 60068-2-5:2000 - Environmental testing. Part 2: Tests. Sa test: Simulated solar

radiation at ground level.

UNE 207010:2003 - Bar code application for the coding of electrical energy meters.

IEC 62052-21 (2004-05) - Electricity measuring equipment (AC). General requirements,

tests and test conditions. Part 21: Tariff and load control equipment. (Replaces IEC
61038).

IEC 62054-21 (2004-05) - Electricity metering (AC) - Tariff and load control - Part 21:

Particular requirements for time switches.

(Replaces IEC 61038).

DIN 43857 (1978-09) - Watthour meters in moulded insulation case without instrument

transformers, up to 60 A rated maximum current; principal dimensions for single-phase
meters.













Advertising
This manual is related to the following products: