CIRCUTOR CIRWATT-B410T Series - Manual (Page 37)

THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL 37 / 53
Screen L12 (CONTRACT 1: CLOSURE 01)
This shows information about the values of contract 1 from the last closure. The screen
behaves in the same way as L11, with the option of Absolute or Incremental values.
L11
ABS Absolute values
OBIS
KWH 1.18.1.1 Active Energy tariff periods since measuring began until
the last closure (if they are active), including the total
(period 0)
1.18.x.01 where x = tariff (period)
KWH 1.18.2.1
KWH 1.18.3.1
KWH 1.18.4.1
KWH 1.18.0.1
KVARL 1.58.1.1 Q1 Reactive Energy tariff periods since measuring
began until the last closure (if they are active), including
the total (period 0)
1.58.x.01 where x = tariff (period)
KVARL 1.58.2.1
KVARL 1.58.3.1
KVARL 1.58.4.1
KVARL 1.58.0.1
Power Excesses 1.12.1.1 Excesses since last billing closure (if they are active)
1.12.x where x = tariff (period)
Power Excesses 1.12.2.1
Power Excesses 1.12.3.1
Power Excesses 1.12.4.1
MAXIMUMS 1.16.1.0 Maximums since the billing closure (if they are active),
including the total (period 0)
1.16.x where x = tariff (period)
MAXIMUMS 1.16.1.1
MAXIMUMS 1.16.2.1
MAXIMUMS 1.16.3.1
MAXIMUMS 1.16.4.1
Shown below are the codes for the incremental value variables:
Inc Incremental values
OBIS
KWH 1.19.1.1 Consumption by Active Energy tariff periods from the last
billing period (if they are active), including the total (period 0)
1.19.x.01 where x = tariff (period)
KWH 1.19.2.1
KWH 1.19.3.1
KWH 1.19.4.1
KWH 1.19.0.1
KVARL 1.59.1.1 Consumption by Q1 Reactive Energy tariff periods from the
last billing period (if they are active), including the total (period
0)
1.59.x.01 where x = tariff (period)
KVARL 1.59.2.1
KVARL 1.59.3.1
KVARL 1.59.4.1
KVARL 1.59.0.1
Power Excesses 1.12.1.1 Excesses since last billing closure (if they are active)
1.12.x where x = tariff (period)
Power Excesses 1.12.2.1
Power Excesses 1.12.3.1
Power Excesses 1.12.4.1
MAXIMUMS 1.16.1.0 Maximums since the billing closure (if they are active),
including the total (period 0)
1.16.x where x = tariff (period)
MAXIMUMS 1.16.1.1
MAXIMUMS 1.16.2.1
MAXIMUMS 1.16.3.1
MAXIMUMS 1.16.4.1
Screen L13 (CONTRACT 1: CLOSURE 02)
This shows information about the values of contract 1 from the penultimate closure. The
screen behaves in the same way as L12.
The information is displayed in exactly the same way as on screen L12, but field F will take the
value 02 instead of 01.