CIRCUTOR CIRWATT-B410T Series - Manual (Page 44)

THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL 44 / 53
Screen L60 (MANUFACTURER INFO: MODEL)
This screen displays the meter model.
Screen L61 (MANUFACTURER INFO: SERIAL)
This screen displays the serial number.
Screen L62 (MANUFACTURER INFO: VERSION)
This screen displays the meter version.
Screen L63 (MANUFACTURER INFO: ENERGY)
This screen displays the active energy imported, expressed in kWh to 3 decimal places. This
screen is very useful for accuracy tests.
Screen L64 (MANUFACTURER INFO: STATUS)
This screen displays the most important meter alarms.
Screen L65 (MANUFACTURER INFO: CRC)
This screen displays the CRC code.
3.2.3.- Special functions
The sealable button and/or the wire cover sensor will be used to access the Special Functions.
To navigate through the different information screens, the sealable button will be used, with
movement within the same level being controlled by short button presses (SP). To access a
higher level, a long button press will be used (LP).
The BACK option at the end of the two menus will allow the user to go back to the stand-by
screen following a long press of the sealable button.
Validation will always be via a long press of the sealable button.
The device will return to Stand-by mode 60 seconds after the last press of the button.