CIRCUTOR CIRWATT-B410T Series - Manual (Page 46)

THREE PHASE STANDARD CIRWATT B METER
CIRWATT B THREE PHASE INSTRUCTION MANUAL 46 / 53
The default parameters are used, which are as follows:
Link address 1
Measuring point address 1
Keys 1
Speed in all ports 9600 baud
Configuration of all ports 8N1
Seasonal changes Automatic
This function will always be carried out locally and is protected by the seals on the wire cover
and the button. A zero reset event will be generated in each case.
The screen will display the following message:
reset
done