CIRCUTOR computer SMART Series (Available until stock) - Manual (Page 17)

M98235701-03-12A Computer Smart 6/Computer Smart 12
- 16 -
Currents and Temperatures Screen (PM5; TypeM1):
The following data is displayed:
Current (in A).
Leakage current (in mA).
Temperature (in ºC).
Comments about temperature measurements:
the unit uses an internal sensor to display the approximate external
temperature of the equipment (internal cabinet temperature), which will be
reached when the current conditions remain stable: number of stages
connected, ventilation (forced or not), external cabinet temperature, load
consumption, etc. If these parameters are not stable, the error in the
temperature reading can increase significantly.
Cos III and PF Screen (PM6; TypeM1):
The following data is displayed:
Three-phase cosine and its type ( inductive, or capacitive).
Power factor, PF.
THDs Screen (PM7; TypeM2):
The following data is displayed:
THD harmonic distortion of the voltage (in %).
THD harmonic distortion of the current (in %).
Voltage Harmonics Screens (PM8 and PM9; TypeM2):
There are two screens. The first screen shows harmonics 3, 5 and 7
and the second screen shows harmonics 9, 11 and 13. The following
data is displayed:
3rd or 9th voltage harmonic (in %).
5th or 11th voltage harmonic (in %).
7th or 13th voltage harmonic (in %).
Current Harmonics Screens (PM10 and PM11; TypeM2):
There are two screens. The first screen shows harmonics 3, 5 and 7 and
the second screen shows harmonics 9, 11 and 13. The following data is
displayed:
3rd or 9th current harmonic (in %).
5th or 11th current harmonic (in %).
7th or 13th current harmonic (in %).