CIRCUTOR computer SMART Series (Available until stock) - Manual (Page 19)

M98235701-03-12A Computer Smart 6/Computer Smart 12
- 18 -
5.3.1 Functions of the Keys on the Measurement Screens
The measurement screens will always be displayed when the unit is in the Normal state (RUN). Use the
keyboard to browse these screens. The functions of each key displayed on the measurement screens are
described next:
Browses the screens and returns to the previous screen. This can only be done from
the instantaneous measurement screens, not from the maximum or minimum
measurement screens.
Browses the screens and opens the next screen. This can only be done from the
instantaneous measurement screens, not from the maximum or minimum measurement
screens.
Opens the maximum measurement screen (if available).
Opens the minimum measurement screen (if available).
Returns to the instantaneous measurement screen from the maximum or minimum
measurement screen. It also returns to this screen automatically after 5 seconds of
inactivity, when no key has been pressed.
long
Connecting capacitors manually: Hold down the key (for more than 3 seconds) and
the regulator will connect the steps sequentially at different time intervals, in
accordance with the connection time setting (see Section 5.5).
long
Disconnecting capacitors manually: Hold down the key (for more than 3 seconds)
and the regulator will disconnect the steps sequentially at different time intervals, in
accordance with the connection time setting (see Section 5.5).
long
Deletes the maximum measurements from the screen (only on the maximum
measurements screen).
Deletes the number of connections (only on the connection number screen).
long
Deletes the minimum measurements from the screen (only on the minimum
measurements screen).
long
After opening the Setup state (SETUP), any steps connected will be automatically
disconnected, with the corresponding disconnection time.
+
long
Deletes the minimum and maximum measurements from the screen (only on the
minimum and maximum measurements screen).