Crompton Controls DCM - Manual (Page 22)

Emotron AB 01-2120-01r2 Installation 21
5.3 Description of functions
The menu structure is described in Fig. 10, page 22. Detailed information is to
be found in Table 8, page 53.
On delivery, the Emotron DCM is pre-programmed with the default settings
shown in Table 8, page 53.
One minute after any front panel button is pressed, the Emotron DCM returns
to:
• Window 00 if an alarm has been triggered.
• Window 01 if the pump is paused. When the DCM is SLAVE it displays
_ _ _.
• Window 02 if the pump is pumping. When the DCM is MASTER and its
SLAVE is pumping it displays _ _ _.
• Window 03 if the pump is pumping and it started as a result of a high-level
switch-over.