Crompton Controls DCM - Manual (Page 36)

Emotron AB 01-2120-01r2 Dual-Pump System Installation 35
7 Dual-Pump System Installation
Fig. 15 Dual-pump application
CAUTION: Before carrying out any work, check that any automatic
control equipment, etc., is disconnected from the power supply
and cannot become live.
NOTE: Some useful hints and examples are given in Chapter 6, page 27,
Single-Pump System Installation.
NOTE: The dual-pump DCM system must not be installed in a pit of
extremely small diameter or width. This will result from time to time in the
DCMs failing to detect the stop/minimum level.
!