Crompton Controls DCM - Manual (Page 56)

Emotron AB 01-2120-01r2 Window Parameters 55
21
Pit volume and level setting,
see Fig. 11, page 23 and Fig.
14, page 32. See also note on
page 22. NOTE! The window is
not shown when the DCM is
SLAVE.
1.0 to 10.0 1.0
22
Maximum pause time.
NOTE! The window is not
shown when the DCM is
SLAVE. Symbol
.
0 to 900 s
15 - 720
min.
600 s
23
Start-up delay.
Symbol .
1 to 170 s 5 s
24
Stop delay.
Symbol .
1 to 90 s 2 s
31
High temperature on pump
motor or motor protection
alarm, terminal 5 (on). Turn off
(OFF).
on / OFF OFF
32
Latched alarm, terminal 5 (on).
Alarm not latched (OFF). Can
only be used when window 31
is (on).
on / OFF OFF
41 Phase asymmetry permitted.
OFF/ 5 to
50%
10%
42
Phase asymmetry latched
alarm (on). Phase asymmetry
alarm not latched. (OFF) Can
be used when window 41 is set
between 5-50%.
on / OFF OFF
Table 8 Window parameters and defaults
Window Function Value Default
Custom
setting
Master Slave