Xtramus NuWIN V1.1 - Manual (Page 144)

139
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES
®
4.20.2 Browse Setup Window
To open the Browse window for configuration, click on the Browse Setup button on
the Chassis Panel.
This is the Browse window to configure. Click on the Port Mapping button to
choose ports for the window.
Use Arrow Key to choose all the ports on the Port map. Click OK on the Port map to
browse the setup of every port of the chassis.
Move the
selected
port.
Move all
the ports.