Xtramus NuWIN V1.1 - Manual (Page 64)

59
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES
®
If the DA value is set as “00000000001(expressed in hexadecimal format),” the
transmission mode is set as “Increase,” the Loop Count value is set as “5,” and Loop
Step value is set as “1,” the transmitted packets under this configuration shown in the
Capture window will be like the following example:
00000000001
00000000002
00000000003
00000000004
00000000005
00000000001
.
.
.
If the mask value of this configuration is set as “XXXX 00000001(expressed in
hexadecimal format),” the actual reading on the Capture window will be:
00000000001
00000000000
00000000001
00000000000
00000000001
00000000000
.
.
.