Xtramus NuWIN V1.1 User Manual
Page 81
76
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
4.9.2.2 Streams Control Mode
For Stream control, packets are sent continuously (with gaps) in the continuous
mode. In the single mode, only one packet is sent. In the burst mode, a number of
packets are sent at once, and their number can be adjusted. In the Multi-burst mode,
multiple batches of packets will be sent, and the dialogue will stretch for further setup.
Up to 2
32
– 1 packets can be set for Packets per Burst, and up to 16,777,215 bursts
can be set for Bursts per Stream.
4.9.2.3 Transmit Control
X-Trailer appendage is not supported in default setting. Choose to enable it. CRC
Checksum can be chosen to remove its appendage. For error configuration, choose
desired errors in the Error Generation dialogue.
4.9.2.4 Inter-Frame Gap