Xtramus NuWIN V1.1 - Manual (Page 89)

84
E-mail: [email protected]
Website: www. X tramus.com
XTRAMUS TECHNOLOGIES
®
4.9.4.2 Set up and Operate in Smart Matrix
Trasmit Header Operation in Smart Matrix is similar to the operation in Transmit Setup.
Only the setting steps between these two are slightly different. The protocol parameters
are divided into 2 groups: DA/ SA and TxUDF 1～TxUDF 4.
Part 1. Simple DA and SA settings
Step 1. Click right mouse on desired port to select Set up Smart Matrix to bring out the
window. Choose the desired packet to check DA and SA in TxUDF to activate.
Check the box(es) to enable all TxUDF parmeters at once.