10 set up matrix – Xtramus NuWIN V1.1 User Manual
Page 96
Advertising
91
E-mail: [email protected]
Website: www.
X
tramus.com
XTRAMUS TECHNOLOGIES
®
4.10 Set up Matrix
Please note that only XM-2301(G) support this function.
Choose Set up Matrix to bring out the Matrix Setup window. Except from making user
defined packets through the Transmit Setup window (section
4.9
), please use Matrix to
edit a series of packets with various combinations to be simultaneously transmitted.
The buttons in the Matrix Setup window toolbar are described in the table below:
Figure Usage
Loads default setting.
Loads from file.
Exports to Excel format.
Exports to Pattern Generation format.
Clears all setting.
Adds new frames.
Sets column width.
Loads from Sniffer .enc file
Advertising