Adept T2 Pendant - Manual (Page 43)

Calibrating the Touchscreen
Adept T2 Pendant User’s Guide, Rev D 43
5.2 Calibrating the Touchscreen
This section describes the process for calibrating the T2 pendant touchscreen.
1. From the main menu, press SYS MENU to display the system menu.
2. Select Touchscreen Calibration. The touchscreen calibration window opens.
Figure 5-1. Touchscreen Calibration Window
NOTE: Once the calibration process is started, it cannot be canceled.
3. Use the T2 pendant stylus (see Figure 1-3 on page 9 ) to perform the calibration
process, as instructed on the screen.
4. When the calibration process is completed, tap the screen one time to exit and
return to the system menu.
5. Press OK to exit the system menu and return to the main menu.