Adept T2 Pendant - Manual (Page 9)

Proper Handling of the T2 Pendant
Adept T2 Pendant User’s Guide, Rev D 9
Emergency Stop Switch
1.6 Proper Handling of the T2 Pendant
You have chosen a high-quality device that is equipped with highly sensitive
state-of-the-art electronics. To avoid malfunctions or damage through improper handling,
and possible voiding of the warranty, follow these instructions during operation.
• When operating the touchscreen, use your finger or the supplied stylus. Never use
sharp objects (such as a screwdriver) for operating the touchscreen.
Figure 1-3. T2 Pendant Stylus
• Do not squeeze or pinch the cable.
• Do not lay the cable over sharp edges to avoid damaging the cable sheath.
• When you are not using the T2 pendant, hang it on the optional wall bracket, if
purchased, for storage.
• Never place the T2 pendant with the operating side facing down, to avoid
damaging the buttons or display.
• Never place the T2 pendant on an unstable surface. It could fall to ground and be
damaged.
• Never place the T2 pendant close to heat sources or into direct sunlight.
• Avoid exposing the T2 pendant to mechanical vibrations, excessive dust,
humidity, or to strong magnetic fields.
DANGER: When the pendant is not connected to the
machine, store the pendant in a place where the operator
cannot see it. Take into account that the operator would
automatically activate the nearest emergency stop in case
of danger. This could have fatal consequences, as the T2
pendant emergency stop will not function when the
pendant is not connected to the machine.