AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 182)

HDCVI Standalone DVR User’s Manual
173
Figure 4-160
4.10.5.8.2 Add/Modify User
Click add user button in Figure 4-158 , the interface is shown as in Figure 4-161.
Please input the user name, password, select the group it belongs to from the dropdown
list.
Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower
than the admin account.
The modify user interface is similar to Figure 4-161.
Figure 4-161
When you create a new user, you can input the corresponding MAC address of current
user. If you leave this item in blank, any MAC address user can share this user account to
login. Please note system needs to check the validity of MAC. Only the 12-digit 0-f format
address can pass the validity verification. System only saves small character even you
input capitalized one. You can see the corresponding prompt if there is any illegal input.
4.10.5.9 Auto Maintain
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete
the files for the specified days. See Figure 4-162.
You can select proper setup from dropdown list.
After all the setups please click save button, system goes back to the previous menu.