AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 74)

HDCVI Standalone DVR User’s Manual
65
setup process is complete.
Figure 4-22
4.4.3.2 Call PTZ Function
Call Preset
In Figure 4-17, input preset value and then click to call a preset. Click
again to stop call.
Call Pattern
In Figure 4-17, input pattern value and then click to call a pattern. Click
again to stop call.
Call Tour
In Figure 4-17, input tour value and then click to call a tour. Click again
to stop call.
Call Scan
In Figure 4-17, input Scan value and then click to call a tour. Click again
to stop call.
Rotate
In Figure 4-17, click to enable the camera to rotate.
System supports preset, tour, pattern, scan, rotate, light and etc function.
Note:
 Preset, tour and pattern all need the value to be the control parameters. You can
define it as you require.
 You need to refer to your camera user’s manual for Aux definition. In some cases, it
can be used for special process.