AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 75)

HDCVI Standalone DVR User’s Manual
66
Aux
Click , system goes to the following interface. The options here are defined by the
protocol. The aux number is corresponding to the aux on-off button of the decoder. See
Figure 4-23.
Figure 4-23
4.4.4 Auto Focus
It is to set auto focus function. Please make sure the camera supports this function.
4.4.5 Color
This function is for one-channel mode only.
Here you can set hue, brightness, contrast, saturation, gain, white level, color mode
and etc. See Figure 4-24.
Figure 4-24