AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 70)

HDCVI Standalone DVR User’s Manual
61
Figure 4-14
Go to the 1-winode mode, on the navigation bar, click , you can see the video on the
large window and the video from the next channel is the default video on the small window.
If you have set PIP function, you can click to view the last edited PIP video.
4.4.3 PTZ Control
The PTZ setup is shown as in See Figure 4-15.
Please note the commend name is grey once device does not support this function.
The PTZ operation is only valid in one-window mode.
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern
aux function, light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is
faster than speed 1. You can use the remote control to click the small keyboard to set.
You can click and of the zoom, focus and iris to zoom in/out, definition and
brightness.
The PTZ rotation supports 8 directions. If you are using direction buttons on the front
panel, there are only four directions: up/down/left/right.
Figure 4-15