AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 72)

HDCVI Standalone DVR User’s Manual
63
Pattern Aux
Scan Aux on-off
button
Rotate Go to menu
4.4.3.1 PTZ Function Setup
Click , you can go to the following interface to set preset, tour, pattern, and scan. See
Figure 4-18.
Figure 4-18
Preset Setup
In Figure 4-18, click preset button and use eight direction arrows to adjust camera to the
proper position. The interface is shown as in Figure 4-19.
Click Set button and then input preset number.
Click Set button to save current preset.
Figure 4-19