3 connecting power supply, 4 connecting video input and output devices, 1 connecting video input – AGI Security SYS-HC0451 HDCVI DVR User Manual User Manual

Page 56: 2 connecting video output, Connecting power supply, Connecting video input and output devices, Connecting video input, Connecting video output

Advertising
background image

HDCVI Standalone DVR User’s Manual

47

 If there are more accessories connected in the rack, please take precaution

measures in case the rack power is overload.

3.3 Connecting Power Supply

Please check input voltage and device power button match or not.

We recommend you use UPS to guarantee steady operation, DVR life span, and other

peripheral equipments operation such as cameras.

3.4 Connecting Video Input and Output Devices

3.4.1 Connecting Video Input

The video input interface is BNC. The input video format includes: PAL/NTSC BNC
(1.0V

B

P- P

B

75Ω.).

The input video format: BNC(0.8VP-P,

75Ω).

The video signal should comply with your national standards.

The input video signal shall have high SNR, low distortion; low interference, natural color

and suitable lightness.

Guarantee the stability and reliability of the camera signal:

The camera shall be installed in a cool, dry place away from direct sunlight, inflammable,

explosive substances and etc.

The camera and the DVR should have the same grounding to ensure the normal

operation of the camera.

Guarantee stability and reliability of the transmission line

BTT TB

Please use high quality, sound shielded BNC. Please select suitable BNC model

according to the transmission distance.

If the distance is too long, you should use twisted pair cable, and you can add video

compensation devices or use optical fiber to ensure video quality.

You should keep the video signal away from the strong electromagnetic interference,

especially the high tension current.

Keep connection lugs in well contact

BTTTB

The signal line and shielded wire should be fixed firmly and in well connection. Avoid dry

joint, lap welding and oxidation.

BT TT

3.4.2 Connecting Video Output

Video output includes a

T

BNC(PAL/NTSC, 1.0VP- P,

75Ω)output, a VGA output and a

HDMI output.

System supports BNC, VGA and HDMI output at the same time.

When you are using pc-type monitor to replace the monitor, please pay attention to the

following points:
 To defer aging, do not allow the pc monitor to run for a long time.
 Regular demagnetization will keep device maintain proper status.
 Keep it away from strong electromagnetic interference devices.

Advertising
This manual is related to the following products: