AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 197)

HDCVI Standalone DVR User’s Manual
188
Color mode It includes several modes such as standard, color. You can
select corresponding color mode here, you can see hue,
brightness, and contrast and etc will adjust accordingly.
5.8.1.3 Encode
5.8.1.3.1 Encode
The encode interface is shown as below. See Figure 5-20.
Figure 5-20
Please refer to the following sheet for detailed information.
Parameter Function
Channel Please select a channel from the dropdown list.
Video enable Check the box here to enable extra stream video. This item is
enabled by default.
Code stream
type It includes main stream, motion stream and alarm stream. You
can select different encode frame rates form different recorded
events.
System supports active control frame function (ACF). It allows
you to record in different frame rates.
For example, you can use high frame rate to record important
events, record scheduled event in lower frame rate and it allows
you to set different frame rates for motion detection record and
alarm record.
Compression The main bit stream supports H.264. The extra stream supports
H.264, MJPG.
Resolution System supports various resolutions, you can select from the
dropdown list. Please note the option may vary due to different
series.