AMETEK SLH Series RevC User Manual
Page 82
Remote Programming
Sorensen SLH-Series DC High Power Electronic Load
FALL Time
Purpose:
The dynamic load mode's FALL slew rate query command.
Command Syntax:
FALL?{NL}
Description:
FALL? returns the presently programmed low load current level in Constant Current mode
The engineering unit is “A/us”.
SHORT ON/OFF
Purpose:
SHORt ON or OFF status query command.
Command Syntax:
SHOR?{NL}
Description:
SHOR? returns the presently SHORt status, “0” indicates SHORt OFF, and “1” indicates SHORt ON.
DYNAMIC ON/OFF
Purpose:
DYNamic ON or OFF status query command
Command Syntax:
DYN?{NL}
Description:
DYN? returns the presently DYNamic ON or OFF status, “0” indicates static load mode or DYNamic
OFF, and “1” indicates DYNamic load mode or DYNamic ON.
5-20
M540074-01
Rev C