AMETEK SLH Series RevC User Manual
Page 89
Advertising
Sorensen SLH-Series DC High Power Electronic Load
Appendix B
Iprogram and Isum Parallel Connection
Use the L-type BNC adapter for the
Isum and the Iprogram BNC connectors on the rear
panel of the Master unit and of the bottom slave unit. Use the T-type BNC adapters for
the
Isum and the Iprogram BNC connectors on the rear panel of each additional slave
unit between.
Figure 3 illustrates these connections.
M540074-01
Rev C
B-5
Advertising