Avalon Firestyles AGP Pellet - Manual (Page 17)

Installation
(For Qualified Installers Only)
17
© Travis Industries 4141230 100-01341
Detachable Vent Connector
This insert includes a detachable vent connector (also attaches to the air intake). This allows the
installer to attach the chimney liner to the vent connector, slide the insert into place, then connect the
vent connector to the appliance. See the illustration below for using the vent latch on the vent
connector.
Connecting the Vent to the Vent Connector
1 Remove the vent connector from the appliance.
2 Apply a bead of high-temperature RTV silicone to the slip connector for the chimney liner. Insert the slip
connector into the vent connector and secure using (4) sheet metal screws. Apply additional RTV silicone to
the area around the connection to ensure an air-tight seal.
NOTE: All vent connections should be made with the tapered section facing downwards (see photos below).