Avalon Firestyles AGP Pellet - Manual (Page 5)

Safety Precautions
5
© Travis Industries 4141230 100-01341
Allow the appliance to cool
completely before carrying out any
maintenance or cleaning. Maintain the door and glass seal
and keep them in good condition.
Do not operate this heater with
broken or missing glass.
Do not slam the door or strike the
glass.
Notify your dealer to replace the
glass if glass on this appliance is
broken or damaged.
Do not operate the heater if the
flame becomes dark and sooty or if
the fire platform overfills with
pellets. Press the “STOP” button
and periodically inspect the heater. Do not place clothing or other
flammable items on or near this
appliance.
The heater will not operate during a
power outage. This heater must be connected to a
standard115 V., 60 Hz grounded
electrical outlet. Do not use an
adapter plug or sever the grounding
plug. Do not route the electrical cord
underneath, in front of, or over the
heater.
Keep foreign objects out of the
hopper.
The exhaust system must be
completely airtight and properly
installed. The pellet vent joints must
be sealed with RTV 500
 F. (260 C.)
silicone sealant.
Your heater requires periodic
maintenance and cleaning (see
"Insert Maintenance"). Failure to
maintain your heater may lead to
accumulation of soot, creosote, and
ash, and smoke spillage or fire in
your home. When installed in a mobile home,
the heater must be bolted to the
floor, have outside air, and NOT BE
INSTALLED IN THE BEDROOM
(per H.U.D. requirements). Check
with local building officials.