Avalon Firestyles AGP Pellet - Manual (Page 21)

Installation
(For Qualified Installers Only)
21
© Travis Industries 4141230 100-01341
5. Place the surround panel in front of the insert. Make sure the wingnut on the surround
panel is loosened 3 to 4 turns. Slide the control panel under the wingnut, push it in, then
slide it down into place. Tighten the wingnut to secure the control panel in place.
6. Carefully slide the surround panel over the hopper lid, taking care to prevent scratching.
When sliding the panel into place, lift up on the panel to prevent scratching (use plastic
from the stove packaging to prevent scratching).
Make sure this wingnut
is loosened 3 to 4 turns.
Bottom of
control panel