Avalon Firestyles AGP Pellet - Manual (Page 43)

Maintenance
43
© Travis Industries 4141230 100-01341
Cleaning the Convection Blower
1 Remove the insert from the fireplace (see page 41).
2 Disconnect the wires leading to the convection blower.
3 Remove the 2 wingnuts securing the blower assembly (disregard photo below). Lift out and remove the
convection blower from the insert as shown below.
NOTE: Do not over-tighten the wingnuts when replacing (the rubber grommets must flex to absorb vibrations).
4 Remove all dust and debris from the convection blower.
NOTE: Take care to prevent damaging the impellers.
Remove the
2 Wingnuts