Baby Lock Diana (BL480A) Instruction and Reference Guide - Manual (Page 20)

10cm
(4")
9
11
9
4
8
10
5
6
7
C
B
A D
5
8 4
3
2
7
6
1
19
Thread the right needle as indicated in steps 1 through 9.
Thread the looper area of the machine following the purple
color-coded thread guides 4~11.
- Raise presser foot to release tension discs.
Note: Use the tweezers provided in the accessory case to
aid in threading the looper.
4) Threading the (Yellow)
(B on needle clamp)
Overlock Right Needle
Thread the looper eye (A) from front to back. Pull about
10cm (4 inches) of thread and position into V cutout (B)
on threader. Firmly hold thread tail with left hand and pull
threader lever (C) up to place thread into correct position
(D) for sewing.
Place the thread from right to left into thread guide.
Place the thread from right to left into thread guide.
4
5
6
7
8
9
10
Thread the balance of the lower looper area of the machine
following the purple color-coded thread guides, placing
thread in guides.