Baby Lock Diana (BL480A) Instruction and Reference Guide - Manual (Page 54)

R
N
R
53
Rolled hemming is done by rolling and overedging the fabric edge.
Light weight fabrics such as lawn, voile, organdy, crepe, etc.
perform the best.
Rolled hemming is not suited for heavy or stiff fabrics.
Note: Rolled hemming can only be performed with the right needle.
Remove the left needle, chain stitch needle and cover stitch
needle(s).
Move the rolled hem lever to setting R.
Set the width adjustment dial to N.
Set stitch length dial to "1~2" and a fine seam will be sewn.
Thread: A variety of thread combinations can be used for rolled
hemming. Thicker threads require a longer stitch length, while
thinner threads sew well when using a shorter stitch length.
Caution:
Be sure to turn off power switch.
N
2
1
Machine Set up
26. HOW TO SEW A ROLLED HEM
1
2
3
4
1
2
3
4
6.5
N
5.5
N