Baby Lock Diana (BL480A) Instruction and Reference Guide - Manual (Page 8)

7
ON
OFF
2
1
1
2
1
2
3
4
1
2
3
4
1
2
3
4
5
6
7
8
Be sure to turn off power switch.
Push the cover to the right as far as it will go.
Pull cover down toward you.
Be sure front cover is closed when
sewing.
Upper looper
Moveable Upper knife
Presser foot
Fixed lower knife
Lower looper
Chain/Cover looper
Rolled Hem
Upper looper clutch / Driving clutch
Connect the machine/foot to the machine
receptacle.
control plug
Plug power line into electric outlet.
Power Switch: Push " l " mark side to turn "ON"
To run the machine and control the speed, press
the controller.
The harder you press, the faster the machine will sew.
To stop the machine from sewing, remove your foot
from the controller.
Push "O" mark side to turn "OFF"
4. HOW TO OPEN FRONT COVER
5. PRINCIPAL PARTS BEHIND THE FRONT
COVER
6. CONNECTING MACHINE TO POWER
SUPPLY
Use only foot controller provided with this machine.
(Type 4C-316B for U.S.A. & CANADA only)
Be sure to make reference to "Warning" on following
Page.
WARNING:
1
2
5
6
8
4
3
7
CAUTION
Note: Always make sure that the machine is in the off
position, before connecting to power supply.
CAUTION