Baby Lock Diana (BL480A) Instruction and Reference Guide User Manual
Page 55
R
1~2
L
N/A
Upper looper thread
Lower looper thread
Needle thread
Topside
Underside
Upper looper thread
Lower looper thread
Needle thread
Needle thread
Topside
Underside
54
Set auto tension dial to A shown at right and test sew on a sample
of your fabric.
Note:
with wooly
nylon and the needle and lower looper with lightweight regular
thread.
For a beautiful rolled hem, thread the upper looper
Set auto tension dial to C shown at right and test sew on a sample
of your fabric.
Correct Balance
Correct Balance
3-Thread Narrow Hem
3-Thread Rolled Hem
Blue
Yellow Green
Red
Purple
Tension Dial
STITCH LENGTH
NEEDLE POSITION
SEAM WIDTH FINGER KNOB
DRIVING CULTCH POSITION
CONVERTER
AUTO TENSION DIAL
A
Woolly nylon
Polyester
Light Weight
fabric
Fabric edge will roll within the stitching.
The lower looper thread will pull the upper looper thread to under
side of your fabric.
Fabric edge will roll within stitching.
Upper and lower looper threads will interlock at the edge of
stitching.
R
1~2
L
N/A
Blue
Yellow Green
Red
Purple
Tension Dial
STITCH LENGTH
NEEDLE POSITION
SEAM WIDTH FINGER KNOB
DRIVING CULTCH POSITION
CONVERTER
AUTO TENSION DIAL
C
Woolly nylon
Polyester
Light Weight
fabric
Note: If the tension needs to be increased gently move the tension
adjustment lever toward the “+” mark in increments indicated
by the smaller white dots on the colored fine tuning label on
front cover.
If the tension needs to be decreased gently move the tension
adjustment lever toward the “-” mark in increments indicated
by the smaller white dots on the colored fine tuning label on
front cover.
Note: If the tension needs to be increased gently move the tension
adjustment lever toward the “+” mark in increments indicated
by the smaller white dots on the colored fine tuning label on
front cover.
If the tension needs to be decreased gently move the tension
adjustment lever toward the “-” mark in increments indicated
by the smaller white dots on the colored fine tuning label on
front cover.