BECKHOFF IPC-Security - Manual (Page 52)

A.4.3.4. Configuring security templates
To view the settings of each template in more detail, you can start the Security Templates Snap-in by per-
forming the following steps:
1. Open Start and select Run
2. Enter mmc.exe and click on OK
3. Go to File, select Add/Remove Snap-in and click on Add
4. Select the Security Templates Snap-in, click on Add and then on OK
5. Expand the entries Security Templates and C:\Windows\Security\Templates
Then browse the template you wish to view. Please note: The templates which are named dc are domain
controller templates and do not apply to your PLC Controller. To apply a template, you need to open the
Security Configuration and Analysis Snap-in:
1. Open Start and select Run
2. Enter mmc.exe and click on OK
3. Go to File, select Add/Remove Snap-in and click on Add
4. Select the Security Configuration and Analysis Snap-in, click on Add and then on OK
52