BECKHOFF IPC-Security User Manual
Page 61
On the other hand, if you only want specific USB Storage devices to be available on the Controller, the above
steps can easily be adapted to your needs. Plug in all USB Storage devices which should be accessible
on the Controller and then deny access to the files, as mentioned above. Of course, you can also disable
USB devices in the system’s BIOS but this would also include non-Storage devices! Please keep in mind,
that some USB devices are necessary for your Controller to run properly, for example a Control Panel (CP)
which uses the USB port for its touchscreen!
A.4.3.15. Configuring RAS
The following chapters explain how to configure the RAS service.
Configuring a VPN dial in
1. Open the Control Panel and then the Network and Sharing Center
2. Click on Change adapter settings
IPC Security
61