ChamSys MagicQ Software Change Log - Manual (Page 123)

MagicQ Software Change Log 109 / 121
72.2 Bug Fixes
Fixed problem with 16 bit position fades when using a non zero pan offset or tilt offset in the Patch window. Sometimes the fade
would jitter slightly when doing slow fades. The size of the jitter depends on the offset. If no pan or tilt offset is set (default is
none) then there is no problem.
Fixed problem with using Cue Stacks triggered from Cue Stack macros using the E and F commands, or by remote commands
when the Cue Stacks had release times and stomping was enabled. Playbacks could get lost and eventually a no free playbacks
message would be shown. This only occurs if stomping was enabled (default = disabled).
Fixed problem with setting DMX addresses in reverse order when in Theatre/Hog II Warp mode.
Fixed problem with setting FX crossfade on individual heads in the Cue Window.