ChamSys MagicQ Software Change Log - Manual (Page 125)

MagicQ Software Change Log 111 / 121
Fixed lock up problem when using ChamNet this could occur if devices were set in ChamNet mode or when the Net Manager
window was open. Seen mostly on MagicQ Rack Mount systems but could also occur on MagicQ consoles. All users using
ChamNet should upgrade to this version.
In some cases the web log file (magicwweb.log) could get very large and cause disc space problems. Users can delete the web
log from the File Manager at any time.
Auto activation of PB1 on start up did not work on MagicQ consoles - all the other activation methods worked fine. Therefore it
is possible to work around it using an auto activated macro 1 or cue stack 1. #0001094.
Fixed problem with using Faders with the setting HTP always active together with a release time. If the Cue stack was set as
a default playback and the playback was not Page 1 then the playback would not release correctly and could go erroneously to
100% after some time.
Fixed problem with Playbacks set to priority Above Programmer. HTP channels on these playbacks would still get overridden
by the Programmer.