CREATOR CR-PGMIII - Manual (Page 8)

CREATOR CHINA 2011-03 WWW.CREATOR1997.COM
1 PGMⅢ Programmable Ethernet Control System
Chapter One ,General Introduction
CR-PGMIII is a patent Programmable
Ethernet Controller launched by CREAOTOR. It
has applied 32bit 667MHz ARM11 CPU, 256M
RAM, and 1G Flash Memory.
The CR-PGMIII Programmable Ethernet
Controller provides multi-types controlling
interfaces: 3 types of network controlling ports:
CR-NET, CR-LINK and Ethernet; IR, I/O, RELAY,
and COM Ports, etc.
Advanced IC Technology has been applied to
provide high-speed accurate integrated control;
and the Open Programming UI ensures the
easiness of programming for various complicated
controlling functions.
1.1 Main Features
◆ Elegant design integrated with both popularity
and fashion
◆ ARM11 CPU,256M DDR RAM,1G Flash
Memory；
◆ 667MHz 32bit powerful CPU；
◆ 8 independent programmable IR Control
modules, supporting multiple same or different
equipment through IR；
◆ 8 independent programmable RS-232/422/485
Controlling interfaces; allowing users to program
and set multiple types of controlling protocols and
codes
◆ 8 low-current replay modules;
◆ 8 digital I/O Modules
◆ 3 types of network communication:
CR-NET,CR-Link,Ethernet；
◆ USB2.0 programming communication
interface；
◆ built-in IR Learning module, easy for
diagnosing and maintenance;
◆ both local and remote control supported;
◆ Universal power （AC100~240V）,
1.2 Controller Installation
The CR-PGMⅢ programmable Ethernet
Controller can be installed onto standard 19 inch
rack. One pair of racking frames has been
provided along with the machine. Please refer to
the following draft for the guidance: